Language tweaks

.vscode/settings.json

@@ -4,5 +4,9 @@
             "language": "markdown",
             "scheme": "file"
         }
+    ],
+    "cSpell.words": [
+        "hackspace",
+        "makerspace"
     ]
 }

content/blog/2023/powerbook-g4-disk-replacement/index.md

@@ -25,7 +25,7 @@ The initial disassembly took about an hour, and most of that time was spent tryi
 
 The replacement hard drive I purchased was a '[Bingogo 2.5" IDE 128GB](https://www.ebay.co.uk/itm/392852308254)'. Chris, the member with the iBook G4, had chosen to buy a cheaper mSATA to IDE converter to replace his iBook drive and when my drive turned up it just turned out to also be a mSATA converter with a disk included. 
 
-Chris has come prepared. In advance of reinstalling his own device, he had downloaded a community-created full disk image of a working Leopard (10.5) install. He was able to write the image onto my drive, saving me from having to fight with physical media and a long installation process. After cobbling together a working system I hit the power for the first time and crossed my fingers. Initially, it look like the image didn't work. The useful 'folder with a question mark' appeared, but at least it was better than when the faulty hard drive was in it. After a little bit of research on Google, we came across the [Openfirmware Wiki](https://forums.macrumors.com/threads/the-open-firmware-wiki.2225024/) on MacRumors, which at least got us to a prompt that we could start investigating what was going on.
+Chris has come prepared. In advance of reinstalling his device, he had downloaded a community-created full disk image of a working Leopard (10.5) install. He was able to write the image onto my drive, saving me from having to fight with physical media and a long installation process. After cobbling together a working system I hit the power for the first time and crossed my fingers. Initially, it looked like the image didn't work. The useful 'folder with a question mark' appeared, but at least it was better than when the faulty hard drive was in it. After a little bit of research on Google, we came across the [Openfirmware Wiki](https://forums.macrumors.com/threads/the-open-firmware-wiki.2225024/) on MacRumors, which at least got us to a prompt that we could start investigating what was going on.
 
 {{< image src="openfirmware.jpg" width="400x" class="is-pulled-left" title="We have a working Openfirmware prompt">}}
 

content/facilities/craft_space/index.md

@@ -5,7 +5,7 @@ subtitle: "A working area for sewing, textiles and other crafts."
 
 {{< image src="sewing.jpg" width="400x" class="is-pulled-right" >}}
 
-Bring your textile creations to life at Leigh Hackspace. Our range of sewing and knitting tools and accessories are available to you whether you want to sew a button, stich a hem, or knit a hat.
+Bring your textile creations to life at Leigh Hackspace. Our range of sewing and knitting tools and accessories are available to you whether you want to sew a button, stitch a hem, or knit a hat.
 
 ### What is available?
 

content/facilities/fabrication/index.md

@@ -7,16 +7,16 @@ subtitle: Use 3D printers and laser cutters to bring your creations to life.
 
 3D printers, vinyl cutters, and laser engraving. If this sounds interesting to you then fabrication is the place you'll want to check out. 
 
-Leigh Hackspace currently operates three 3D printers, a [Anycubic Vyper](https://www.anycubic.com/products/anycubic-vyper), a [Ender 3 Pro](https://www.creality.com/products/ender-3-pro-3d-printer), and a Makerbot Replicator 2. Between them they're able to print most things you can think of. We also hold a stock of filament that is available for use by members.
+Leigh Hackspace currently operates three 3D printers, an [Anycubic Vyper](https://www.anycubic.com/products/anycubic-vyper), an [Ender 3 Pro](https://www.creality.com/products/ender-3-pro-3d-printer), and a Makerbot Replicator 2. Between them they're able to print most things you can think of. We also hold a stock of filament that is available for use by members.
 
 For engraving, we have a hackspace built laser engraver that can work with a variety of materials. While it isn't powerful enough to cut it can handle any engraving and etching job with ease.
 
-Our vinyl cutter is a A3 GCC Lynx S-30 desktop cutter, a small industrial machine that can handle roll and sheet material, and can do most jobs without issue.
+Our vinyl cutter is an A3 GCC Lynx S-30 desktop cutter, a small industrial machine that can handle roll and sheet material, and can do most jobs without issue.
 
-We also have a CAD system available for member use, everything needed to get you started on the 3D printers, laser engraver, and the vinyl cutter is ready to go on the system. No extra setup of your PC required.
+We also have a CAD system available for member use, everything needed to get you started on the 3D printers, laser engraver, and the vinyl cutter is ready to go on the system. No extra setup of your PC is required.
 
 ### 3D Printer Status
 
-Our 3D printers are all connected and can be tracked remotely by member, allowing you to leave long running jobs going. Here is live look at what our printers are currently doing:
+Our 3D printers are all connected and can be tracked remotely by members, allowing you to leave long running jobs going. Here is a live look at what our printers are currently doing:
 
 {{< printers >}}

content/facilities/social_space/index.md

@@ -5,6 +5,6 @@ subtitle: "A social area to relax and run events from."
 
 {{< image src="social_space.jpg" width="400x" class="is-pulled-right" >}}
 
-Our social space is the open area that can be used to relax, play some games, or even run an event. The space is fitted with a small stage, a bar, seats, and tables.
+Our social space is an open area that can be used to relax, play some games, or even run an event. The space is fitted with a small stage, a bar, seats, and tables.
 
 The space is available for members and the public (with member support) to run events in. If you're interested in running a regular event or using the space then please get in contact.

content/facilities/workshop/index.md

@@ -10,8 +10,7 @@ Our woodwork shop is the home of everything loud and dusty, along with a stock o
 ### What is available?
 
 #### Hand Tools
-
-* Screw drivers, bits of various types and sizes.
+* Screwdrivers, bits of various types and sizes.
 * Chisels for general use.
 * Craft knives.
 * Wood and metal saws.

content/history/index.md

@@ -32,7 +32,7 @@ The initial build-out happened during November 2019, but was paused early 2020 d
 
 ### Leigh Hackspace '3.0'
 
-The '3.0' hackspace opened Feburary 2023 and now consists of three units on the third floor of the mill. A shared main space, a workshop and craft area, and a social space. Some areas were still being built out, but the space was now open for members to use.
+The '3.0' hackspace opened February 2023 and now consists of three units on the third floor of the mill. A shared main space, a workshop and craft area, and a social space. Some areas were still being built out, but the space was now open for members to use.
 
 In early July the [electronics bay]({{< ref "/facilities#electronics-bay" >}}) was completed giving members a wide selection of tools and components for any projects they are created. Then in November the [darkroom]({{< ref "/facilities#dark-room" >}}) was finally fitted for power and could be used by our members.
 
@@ -40,4 +40,4 @@ In early July the [electronics bay]({{< ref "/facilities#electronics-bay" >}}) w
 
 ## Looking to the future
 
-The hackspace will always be in a fluid state as we think of additional ways to utilize the space available to us. Our on-going aim is to foster relationships with the mill residents and the wider Leigh community. 
+The hackspace will always be in a fluid state as we think of additional ways to utilize the space available to us. Our ongoing aim is to foster relationships with the mill residents and the wider Leigh community. 

content/visit.md

@@ -30,7 +30,7 @@ Leigh Spinners Mill is located at the end of Park Road, use the postcode `WN7 2L
 
 ### Car Parking
 
-The mill has a large gravel public car-park and additional overflow areas. Parking is free but may become busy during popular times. The car park is open from **8 am** until **10 pm**, if you are visiting outside of these hours then it is recommended you park elsewhere. Please, **do not park on Park Lane**, as this is residents-only parking.
+The mill has a large gravel public car park and additional overflow areas. Parking is free but may become busy during popular times. The car park is open from **8 am** until **10 pm**, if you are visiting outside of these hours then it is recommended you park elsewhere. Please, **do not park on Park Lane**, as this is residents-only parking.
 
 ## Travelling by bike