add Xiaomi MJSXJ03HL with JXQ03

devices/t31_lite_xiaomi-mjsxj03hl-jxq03/general/overlay/usr/sbin/autoled.sh

@@ -0,0 +1,62 @@
+#!/bin/sh
+#
+# Automatic LED control for Xiaomi MJSXJ03HL
+
+streamerProcess="majestic"
+serviceProcess="sysupgrade"
+pollingInterval=1
+
+show_help() {
+    echo "Usage: $0 [-p process] [-s process] [-i value] [-h]
+    -p process   Monitored streamer process (default = ${streamerProcess}).
+    -s process   Monitored service process (default = ${serviceProcess}).
+    -i value     Polling interval in seconds (default = ${pollingInterval}).
+    -h           Show this help."
+    exit 0
+}
+
+# override config values with command line arguments
+while getopts H:L:i:h flag; do
+    case ${flag} in
+	p)
+	    streamerProcess=${OPTARG}
+	    ;;
+	s)
+	    serviceProcess=${OPTARG}
+	    ;;
+	i)
+	    pollingInterval=${OPTARG}
+	    ;;
+	h | *)
+	    show_help
+	    ;;
+    esac
+done
+
+echo "Streamer process: ${streamerProcess}"
+echo "Service process: ${serviceProcess}"
+echo "Polling interval: ${pollingInterval} sec"
+
+led_state=0
+/usr/sbin/led_control.sh -o 0 -b 0
+
+while true; do
+    if killall -q -0 $serviceProcess; then
+	if [ $led_state -ne 3 ]; then
+	    echo "$serviceProcess is running, turn white LED on"
+	    /usr/sbin/led_control.sh -o 1 -b 1
+	    led_state=3
+	fi
+    else
+	if [ $led_state -ne 1 ] && ! killall -q -0 $streamerProcess; then
+	    echo "$streamerProcess is not running, turn orange LED on"
+	    /usr/sbin/led_control.sh -o 1 -b 0
+	    led_state=1
+	elif [ $led_state -ne 2 ] && killall -q -0 $streamerProcess; then
+	    echo "$streamerProcess is running, turn blue LED on"
+	    /usr/sbin/led_control.sh -o 0 -b 1
+	    led_state=2
+	fi
+    fi
+    sleep $pollingInterval
+done

devices/t31_lite_xiaomi-mjsxj03hl-jxq03/general/overlay/usr/sbin/led_control.sh

@@ -0,0 +1,36 @@
+#!/bin/sh
+#
+# LED control for Xiaomi MJSXJ03HL
+
+show_help() {
+    echo "Usage: $0 [-o <0|1>] [-b <0|1>]
+    -o <0|1>   Switch state for orange LED.
+    -b <0|1>   Switch state for blue LED."
+    exit 0
+}
+
+led_control() {
+    echo "Switching LED with GPIO${1} to state ${2}"
+    if [ ! -d /sys/class/gpio/gpio${1}/ ]; then
+	echo ${1} > /sys/class/gpio/export
+	echo out > /sys/class/gpio/gpio${1}/direction
+    fi
+    echo ${2} > /sys/class/gpio/gpio${1}/value
+}
+
+if [ $# -eq 0 ]; then show_help; fi
+while getopts o:b: flag; do
+    case ${flag} in
+	o)
+	    [ ${OPTARG} -eq 0 -o ${OPTARG} -eq 1 ] || show_help
+	    led_control 39 ${OPTARG}
+	    ;;
+	b)
+	    [ ${OPTARG} -eq 0 -o ${OPTARG} -eq 1 ] || show_help
+	    led_control 38 ${OPTARG}
+	    ;;
+	*)
+	    show_help
+	    ;;
+    esac
+done

devices/t31_lite_xiaomi-mjsxj03hl-jxq03/general/overlay/usr/share/openipc/customizer.sh

@@ -0,0 +1,35 @@
+#!/bin/sh
+#
+# Perform basic settings on a known IP camera
+#
+#
+# Set custom upgrade url
+#
+fw_setenv upgrade 'https://github.com/OpenIPC/builder/releases/download/latest/t31_lite_xiaomi-mjsxj03hl-jxq03-nor.tgz'
+#
+#
+# Set custom majestic settings
+#
+cli -s .system.webAdmin disabled
+cli -s .system.staticDir /var/www/majestic
+cli -s .isp.blkCnt 1
+cli -s .nightMode.enabled true
+cli -s .nightMode.irCutPin1 49
+cli -s .nightMode.irCutPin2 50
+cli -s .nightMode.backlightPin 60
+cli -s .video0.codec h264
+#
+#
+# Set wlan device and credentials if need
+#
+fw_setenv wlandev rtl8189fs-generic
+#fw_setenv wlanssid Router
+#fw_setenv wlanpass 12345678
+#
+#
+# Set osmem and rmem
+#
+fw_setenv osmem 39M
+fw_setenv rmem 25M@0x2700000
+#
+exit 0